Compared with the internal cylindrical grinding machine of lathes, milling machines, etc., the use of CNC system later, due to its special requirements for CNC system. In recent decades, with the realization of CNC technology, continuous grinding wheel dressing, automatic compensation, automatic wheel change, multi-table, automatic transmission and clamping workpiece, CNC technology has gradually become popular in surface grinding machines and internal cylindrical grinding.
Dongguan ganzoo Prototype Manufacturing Co., Ltd. is a solution provider focusing on prototypes, high-precision parts, molds, on-demand manufacturing and other one-stop services. Is an expert in CNC machine equipment,CNC Machining Parts,Custom,CNC Machining Aluminum Accessories,Parts CNC Machining Service, if you are interested in our services or need any technical support, welcome to contact us Ms.Becky+8613006687216, we are happy to share our understanding of plastic injection molding with you and provide solutions for your economical injection molding.
Internal grinding machine usage procedure
1. Check the fuel tank, the height of the fuel tank reaches the hydraulic index;
2. Check whether the oil grade and material quality meet the instructions for use;
3. The operation handle (handwheel) should be placed in the closed or unloaded position, the wheel frame (grinding head) as for the retreat position, the moving parts should not collide with each other;
4. Check whether the oil pump motor is running normally, and then check whether the live oil, auxiliary oil and lubricating oil pressure meet the instructions. (With the unloading function of the machine, the main oil pressure should be adjusted to the minimum, and the operating handle should be unloaded to the stop position, and then the pressure should be checked.)
5. The machine should open the discharge valve, discharge the air in the cylinder and system, and then close the discharge valve.
6. The machine with hydraulic operation box should adjust the opening and closing valve and the speed handle of the workbench according to the instructions of the book, so that the workbench decelerates and reciprocates several times in a short distance. After normal operation, gradually adjust to the maximum speed, check whether the entire stroke in the operation and commutation is normal (the machine with a table speed greater than 15m/min cannot be adjusted to the maximum stroke), whether there is impact and obvious detention phenomenon.
7. After the normal operation of the internal grinding machine table, carry out the wheel frame rapid advance and retreat and feed experiment. Check that the wheel head moves quickly to the end position and there are no impacts. Adjust the feed rate within the range specified in the instruction manual. Check whether the operation is normal.
Internal grinding machines are easy to maintain
1. The internal grinder is used continuously for a long time, which will accelerate the aging and even burn out, so it can let it rest intermittently, or often change the appearance of the inner grinder, or its inner grinder protects the operating mode for a period of time, which will help delay the aging of the grinder.
2. If the temperature is too low (below minus 30 degrees), it should be discontinued. The splicing display is a valuable electronic product, which is dangerous with high voltage and prohibited by non-professionals. Water is very sensitive to the humid weather of the southern rainy season and can easily damage the internal components of the screen, so run it regularly, or you can put a bag of moisture repellent inside the screen.
3. The internal wall of the grinder is a piece of glass, to avoid hardware collision, can not apply pressure to the surface of the grinder, if dirt is found on the surface of the grinder, the dirt should be removed by an accurate method. The economy that cannot be washed directly onto the surface of the glass grinder shows that it is possible to flow inside the circulating mill and cause short-circuit faults.
January 16, 2025
January 16, 2024
May 28, 2024
E-mel kepada pembekal ini
January 16, 2025
January 16, 2024
May 28, 2024
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
